Construction Of 2,000 Litres Capacity Water Reservoir
In the construct of 2,000 litres capacity water reservoir galvanized steel sheet forms the tank and an angle iron rod forms the stand. Two full length galvanized sheet were marked out and cut out to the required sizes. The work stated by cutting the it gauges galvanized steel sheets of full length into geometrical dimensions of the cylindrical shape
After cutting, the different of the sized were assembled and joined together by using 12- guage electrode on are holding machine. The complete holding of the parts with the exist piping were ensured.
The top of the tank has a circular shape opening for the entering of water which is covered with the constructed over. in order to provide rigid foundation two angled iron was cast and assembled together which is the constructed support base.
The 2,00 litres capacity water reservoir is designed for effective storage and transfer of water through the tap control which allow the easy flow of water through the tank
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title page
Participants
Letter of transmittal
Dedication
Acknowledgement
Abstracts
Table of contents
Introduction (Chapter one)
Literature review (Chapter three)
Conclusion and Recommendation (Chapter four)
References.
This “Construction Of 2,000 Litres Capacity Water Reservoir” file contains 3 Chapters, 30 Pages and 4,192 Words.
The author of Construction Of 2,000 Litres Capacity Water Reservoir is written at the front page of the downloaded file.
To download this Construction Of 2,000 Litres Capacity Water Reservoir full file, click on “Download File” on top of this page and follow the next.