Design And Installation Of 200 Watt Solar Power System
The 200W solar system was determined by load assessment, solar panel number determination, battery requirement and then inverter sizing. A complete solar panel rated at 200w was however purchased, together with 2 no. 150A solar battery, 1500W inverter and also 10A charge controller. These were assembled together with necessary protective gadgets like cut out switches; to give the 200W expected. The solar panel was mounted outside the building to allow for maximum collection of sun energy. It is expected that the system will help the department meet up with its office duties even when central power is not available.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Approval page
Dedication
Acknowledgement
Abstract
Table of content
List of figures
List of tables
CHAPTER ONE:
1.0 INTRODUCTION
1.1 Need for the project
1.3 Scope of study
1.4 Definition of terms
CHAPTER TWO:
2.0 LITERATURE REVIEW
2.1 The basics of solar power system
2.2 Principle of solar panel
2.2.1 Estimating system out
2.2.2 Standard test conditions
2.2.3 Temperature
2.2.4 Dirt and dust
2.2.5 Mismatch and wiring losses
2.3 Solar charge controller
2.4 Principle of inverter
2.4.1 Inverter sizing
2.4.2 DC to AC conversion losses
2.5 solar battery
2.5.1 Temperature effect
2.5.2 Battery voltage
2.5.3 Battery power conversion efficiency
2.5.4 Monitoring and maintenance
CHAPTER THREE:
3.0 SYSTEM OPERATION
3.1 Block diagram of the system
3.2 System operation with block diagram
CHAPTER FOUR:
4.0 SYSTEM DESIGN
4.1 Load evaluation and power consumption table
4.1.1 Calculating power consumption
4.2 Battery sizing
4.3 Solar panel sizing
4.3.1 Typical Pv electrical system types
4.3.2 Solar array sizing worksheet
CHAPTER FIVE:
5.0 PROCUREMENT AND INSTALLATION
5.1 Procurement
5.2 Determination of installation site
5.2.1 Mounting options
5.3 Installation procedure
CHAPTER SIX:
6.0 TEST AND RESULT
6.1 Test and results
CHAPTER SEVEN:
7.0 CONCLUSION AND RECOMMENDATION
7.1 Conclusion
7.2 Recommendation
7.3 Limitation
Reference
This “Design And Installation Of 200 Watt Solar Power System” file contains 7 Chapters, 44 Pages and 5,111 Words.
The author of Design And Installation Of 200 Watt Solar Power System is written at the front page of the downloaded file.
To download this Design And Installation Of 200 Watt Solar Power System full file, click on “Download File” on top of this page and follow the next.