Production Control System
(A Case Study Of Anammco Nigeria Limited Eneme Enugu State)
The theme of the research work is production control system software, (A case study of Anammco Nigeria Ltd Emene Enugu, Enugu State.
The objective of this work is to bring it to emphasis on a new system that will help improve production control system software in production companies
The problem encountered during this research work project can be affected at factors. Problem encountered in this research work have been classified into technical and non-technical problem
The major problem encountered during the research work is the problem of inadequate material to provide enough used information about the bill of material used in Anammaco and their defailed analysis.
Also the non technical problem encourtered is the problem of time to necessary of information and acquiring necessary material used in Anammco
All these factors contributed to set back of this research work
Observation and analysis so far made in this research has clearly show that the importance of bill of materials and its study cannot be over emphasized.
Finally, this program will help Anammco in keeping accurate records for their staff. It will also help them to reduce rechdancy in their staff record stored in database.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title page
Certification
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
1.0 INTRODUCTION
1.0 Background of the study 1
1.2 Statement of problem 3
1.3 Purpose of the study 4
1.4 Scope of the study 3
1.5 Significance of the study 5
1.6 Limitation of the study 5
1.7 Definition of terms 6
CHAPTER TWO
REVIEW OF RELATED LITERATURE
2.1 Introduction 8
2.2 Literature review 10
CHAPTER THREE
SYSTEM ANALYSIS, METHODOLOGY AND DESIGN
3.1 Introduction 13
3.2 Methodology 13
3.3 Analysis of case study 14
3.3.1 Organizational structure 15
3.3.2 Sources of data 16
3.3.3 Procedures in the current system 17
3.4 Overall data flow diagram (DFD) of the
current system 20
3.5 Files and Record 22
3.6 Problems associated to the current system 24
3.7 New system design 25
3.7.1 System proposal 27
3.7.2 Proposed system high level model 28
3.7.3 Design objective 29
3.7.4 Input/output specification 29
CHAPTER FOUR
SYSTEM DEVELOPMENT AND IMPLEMENTATION
4.1 Introduction 31
4.2 Control center/main menu 31
4.3 Program development 31
4.3.1 Language selection 32
4.3.2 Program module 32
4.3.3 System flow chart 33
4.3.4 Program flow chart 35
4.3.5 Program codes/sources program 36
4.4 Program implementation 36
4.4.1 Documentation and installation 36
CHAPTER FIVE
SUMMARY, CONCLUSIONS AND RECOMMENDATIONS 39
5.2 Summary 40
5.3 Conclusion 40
Recommendation 42
This “Production Control System” file contains 5 Chapters, 49 Pages and 5,506 Words.
The author of Production Control System is written at the front page of the downloaded file.
To download this Production Control System full file, click on “Download File” on top of this page and follow the next.