Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment

7 Chapters
|
61 Pages
|
8,223 Words

The purpose of the project is to study the effect of liquid flow rate and gas flow rate on the pressure drop in a packed absorption tower and also to repair and restore the packed absorption tower to good working condition.

Trouble shooting revealed that the exit drain value was broken due to carelessness on the part of former user of the equipment. We had to carry out glassblowing operations using borosilicate glass to construct another value. Once this was done pressure build up within the tower was restored for absorption operation to take place.
A plot of log DO/H against log a superficial gas velocity gave 2.0774 2.3037 and 1.4940 respectively for slopes at varied superficial liquid velocity.

We concluded that increase in gas flow rate lead to increase in pressure drop since the graph obtained is linear. There was a drop in slope from lower liquid rate to higher as operation neared flooding condition. This means that industrially more cost is alluded to pumping operation to be successful.

Click here to download full ‘Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment’ file or Click here to view Table of Content.

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Title
Letter of transmittal
Approval page
Dedication
Acknowledgement
Abstract
Table of content

CHAPTER ONE
INTRODUCTION
1.2 Objectives of the project

CHAPTER TWO
2.0 Literature review
2.1 Pressure drop
2.3 Loading and flooding
2.4 Description of tower
2.7 packing characteristic
2.7.3 Water pump operation
2.8 Design procedure of tower
2.8.2 Selection of solvent

CHAPTER THREE
3.0 Experiment procedure
3.1 Glass blowing process and procedure
3.1.1 General physical properties of glass
3.1.2 General chemical properties of glass
3.2 Borosilicate glass properties
3.3 Construction of drain value

CHAPTER FOUR
Data analysis
Discussion
CHAPTER FIVE
Conclusion
Recommendation
References
Appendix 1: summary of calculation
Graph 11: plot of log DP/H vs log a 46
Appendix 111: cost of repairing equipment 49
Appendix 111: scale drawing of packing absorption tower

The ‘Table of Content’ ends here, Click here to download ‘Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment’ Project material.

Share Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment On:

FREQUENTLY ASKED QUESTIONS

This “Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment” file contains 7 Chapters, 61 Pages and 8,223 Words.

The author of Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment is written at the front page of the downloaded file.

To download this Effect Of Liquid Flowrate And Gas Flowrate On A Packed Absorption Tower And Repair Of Equipment full file, click on “Download File” on top of this page and follow the next.