Design And Construction Of Automatic Fence Light Controller
The very fundamental reasons behind this project assignment is to expose student to the very important aspect of private and independent research work not only theories but also subsequent translation of the theoretical research work into a particular function system.
The project construction of automatic fence light controller has been done primarily as a photo type design it could be further modified suit the situation where it will be used e.g when used to activate an alarm the led could be further modified to suit the situation where it will be used e.g when used to activate an alarm the led could be replaced with a relay and feedback resistor removed (for greater sensitivity)
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Approval Page
Abstract
Table Of Contents
Acknowledgement
Dedication
Chapter One
1.1 Introduction
Chapter Two
2.1 Description Of Components Used
2.2 Integrated
2.3 Transistor
2.4 Diode
2.5 Resistor
2.6 Variable Resistor (Preset)
2.7 Capacitor
2.8 Light Dependent Resistor (Ldr)
2.9 Relay
2.10 Transformer
Chapter Three
3.1 Circuit Drawing Of The Automatic Fence Light Controller
3.2 Achieve Function Of The Alto Fence Light Controller
3.3 Rectification Stage Of The Circuit
Chapter Four
4.1 Principles Of Operation Of The Automatic Fence Light Controller
4.2 Project Component /Materials Cost & Packaging
Chapter Five
5.1 Test Measurement And Observation
5.2 Conclusion And Recommendation
References.
This “Design And Construction Of Automatic Fence Light Controller” file contains 5 Chapters, 25 Pages and 2,587 Words.
The author of Design And Construction Of Automatic Fence Light Controller is written at the front page of the downloaded file.
To download this Design And Construction Of Automatic Fence Light Controller full file, click on “Download File” on top of this page and follow the next.