Construction Of Two Feet Electronics Fluorescent Lamp
(A Case Of Institute Of Management And Technology (Imt) Enugu States)
Engineering being the mother every technology cannot be neglected. Without practical application in the field of engineering. The student and their tutors are impotent. The incrative nature of engineering depends on the technical know-how of the engineer.
The purpose of practical project to students is to help them acquire practical knowledge in their choosing area of specification. It helps them to have a foretaste of the real world.
This report is a comprehensive report on the practices project I did. Precisely, with adequate knowledge and preparation, the student will celebrate victory from time to time.
Onyechi Ifeoma .M.
November, 2007.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Dedication
Acknowledgement
Preface
Table Of Content
Abstract
Chapter One
1.0 Introduction
Chapter Two
2.0 Literature Review
2.1 Component Description
2.2 Capacitor
2.2.1 Characteristic Of Capacitors
2.3 Resistor
2.4 Transformer
2.5 Transistor
2.6 Diode
Chapter Three
3.0 Principle Of Operation
3.1 Block Diagram
3.2 Circuit Diagram
3.3 Wiring Diagram
Chapter Four
4.0 Construction
4.1 How The Construction Was Made
4.2 Construction Of The Chassis (Casing)
4.3 Flat Pattern Drawing Of The Chassis
4.4 Tools Used During Construction
Chapter Five
5.0 Testing & Result
Chapter Six
6.0 Recommendation And Conclusion
6.1 Recommendation
6.2 Conclusion
Reference
This “Construction Of Two Feet Electronics Fluorescent Lamp” file contains 5 Chapters, 32 Pages and 3,936 Words.
The author of Construction Of Two Feet Electronics Fluorescent Lamp is written at the front page of the downloaded file.
To download this Construction Of Two Feet Electronics Fluorescent Lamp full file, click on “Download File” on top of this page and follow the next.