Design And Construction Of Electronic Door Bell
This research work on “Design And Construction Of Electronic Door Bell” is available in PDF/DOC. Click the below button to request or download the complete material
ABSTRACT
An electronic bell is a signaling device typically placed near an entry door to a building. When a visitor presses a button the bell rings inside the building, alerting the occupant to the presence of the visitor. Modern house bells are electric — they are actuated by an electric switch.
In most wired systems, a button on the outside next to the door, located around the height of the doorknob, activates a signaling device (usually a chime, bell, or buzzer) inside the building. Pressing the electronic bell button, a single-pole, single-throw (SPST) pushbutton switch momentarily closes the doorbell circuit. The function of the indicator is to indicate when someone is pressing the button.
TABLE OF CONTENTS
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 OBJECTIVE OF THE PROJECT
1.2 SIGNIFICANCE OF THE PROJECT
1.3 LIMITATION OF THE PROJECT
1.4 APPLICATION OF THE PROJECT
1.5 SCOPE OF THE PROJECT
1.6 PROJECT ORGANIZATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF DOORBELL
2.2 HISTORICAL BACKGROUND OF THE PROJECT
CHAPTER THREE
3.0 CONSTRUCTION
3.1 SYSTEM BLOCK DIAGRAM
3.2 SYSTEM OPERATION
3.3 CIRCUIT DESCRIPTION
3.4 DESCRIPTION OF COMPONENTS USED
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
CHAPTER ONE
1.1 INTRODUCTION
To cleanly understand the wood information technology and communication which is the life blood of all human activities the assimilation of communication technology is of great important. The development of communication technology in any nation makers communication technology easy and pleasant. And one of basic building block of a communication system is the house bell indicating which serves as inter-call light to ensure proper communication within an officer or domestic.
An electronic bell can be defined as dunce which can be use to alert signal for indicating of problem in alarm signals.
The device is classified according to were types, mode of operation and the application there are numerous types of alarming signals but for the purpose of this project an electric bell with light indicator is considered.
This device receives its input signal form an electrical device known as bell push. That was connected at the wing board Via joint box. The signal (current) passes through the wire and fed into the bell which causes the bell to ring in order to alert the receiver.
Furthermore, the objective of this electronic bell is to provide a cheap and continent means of communication between two or more people in the same premises.
The major different between inter- communication system using telephone and electric bell is that the signal is transmitted by the call indicator system in place of speech as in the case of the telephony.
In most wired systems, a button on the outside next to the door, located around the height of the doorknob, activates a signaling device (usually a chime, bell, or buzzer) inside the building. Pressing the electronic bell button, a single-pole, single-throw (SPST) pushbutton switch momentarily closes the doorbell circuit. One terminal of this button is wired to a terminal on a transformer. A doorbell transformer steps down the 240-volt AC electrical power to a lower voltage, typically 10 to 20 volts.
1.2 OBJECTIVE OF THE PROJECT
The objective of this electronic bell is to design a device that will provide a cheap and continent means of communication between two or more people in the same premises. In electric bell, the signal is transmitted by the call indicator system is to
1.3 SIGNIFICANCE OF THE PROJECT
Electronic bell Provide a cheap and continent means of communication between two or more people in the same premises. It can also be used in offices or industries as a mean alerting of someone.
1.4 LIMITATION OF THE PROJECT
This project operates with power supply, which means that the system will stop working whenever mains power supply fails.
1.3 SIGNIFICANCE OF THE STUDY
Electronic bell Provide a cheap and continent means of communication between two or more people in the same premises. It can also be used in offices or industries as a mean alerting of someone.
1.4 SCOPE OF THE PROJECT
Electronic bell components include the outdoor button, wiring, battery, buzzer or speaker. The electric doorbell functions when the door button, outside the home, is pushed, causing electrical current to flow into a circuit. When a visitor came to the house and want to inform the occupant of the house of his presences, all he need to do is to press the switch button. Due to the switch connection to the circuit the wire ‘w’ develops resistance and gets conducted because of battery connector and also to the circuit.
1.5 APPLICATION OF THE PROJECT
This Electronic bell is widely used:
- at railroad crossings,
- in telephones,
- fire and burglar alarms,
- as school bells, doorbells,
- and alarms in industrial plants
1.6 PROJECT WORK ORGANIZATION
The various stages involved in the development of this project have been properly put into five chapters to enhance comprehensive and concise reading. In this project thesis, the project is organized sequentially as follows:
Chapter one of this work is on the introduction to electronics bell. In this chapter, the background, significance, objective, application, scope, limitation and problem of electronics bell box were discussed.
Chapter two is on literature review of an electronics bell. In this chapter, all the literature pertaining to this work was reviewed.
Chapter three is on design methodology. In this chapter all the method involved during the design and construction were discussed.
Chapter four is on testing analysis. All testing that result accurate functionality was analyzed.
Chapter five is on conclusion, recommendation and references.
A 150–300 word synopsis of the main objectives, methods, findings, and conclusions of the Design And Construction Of Electronic Door Bell should be included in the abstract.
Every chapter, section, and subsection in the research work should be listed in the Table of Contents, including the page numbers that correspond to each one.
The background, research question or hypothesis, and objective or aim of the Design And Construction Of Electronic Door Bell should all be presented in the introduction, which is the first section.
A survey of previously conducted research on Design And Construction Of Electronic Door Bell should be included in the literature review, together with an overview of the main conclusions, a list of any gaps, and an introduction to the current study.
The conclusion part should address the implications of the study, provide an answer to the research question and summarize the key findings.
The reference of Design And Construction Of Electronic Door Bell, which should be formatted following a particular citation style (such as APA, MLA, or Chicago), is a list of all the sources cited in the title.
Other important sections of the Design And Construction Of Electronic Door Bell should include the Title page, Dedication, Acknowledgments, Methodology, Results, Discussion, Appendices, Glossary, or Abbreviations List where applicable.