Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH)
This research work on “Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH)” is available in PDF/DOC. Click the below button to request or download the complete material
This project is titled the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices and in homes in the absence of power supply from the national grid (PHCN). In order words the device / item serves as a substitute for national grid which almost monopolises the power supply to people.
It is designed in such a way that it will take up 24v DC from battery (12V/100AH *2) and inverts it to an output of 230v, 50Hz AC. It makes no noise during operation and no hazardous carbon monoxide is generated in the surrounding.
This is a feature that makes it safe to use any where when compared to generator. Also, the circuit is capable of charging the battery (i.e 24v source) when the power from the supply authority is on. This greatly reduces the cost of operation of the system.
This work is aimed at designing a 3.5kva modified sine wave inverter that can be used to power appliances both in homes and industries which is powered with 24v supply.
TITLE PAGE
APPROVAL PAGE
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENT
CHAPTER ONE
1.0 INTRODUCTION
1.1 BACKGROUND OF THE PROJECTR
1.2 PROBLEM STATEMENT
1.3 OBJECTIVE OF THE PROJECT
1.4 SIGNIFICANCE OF THE PROJECT
1.5 APPLICATION OF THE PROJECT
1.6 SCOPE OF THE PROJECT
1.7 ADVANTAGES OF THE PROJECT
1.8 LIMITATION OF THE PROJECT
1.9 PURPOSE OF THE PROJECT
1.10 METHODOLOGY
1.11 PROJECT ORGANISATION
CHAPTER TWO
2.0 LITERATURE REVIEW
2.1 REVIEW OF HISTORY OF AN INVERTER
2.2 REVIEW OF HOW TO CHOOSING THE RIGHT INVERTER
2.3 REVIEW OF THE DIFFERENCE BETWEEN SINE WAVE AND MODIFIED SINE WAVE INVERTER.
2.4 REVIEW OF INVERTER CAPACITY
2.5 SAFETY OF INVERTER
2.6 INVERTER RATING
2.7 WHY CHOOSE A MODIFIED SINE WAVE INVERTER?
2.8 TYPES OF INVERTER
CHAPTER THREE
3.0 METHODOLOGY
3.1 BASIC DESIGNS OF AN INVERTER
3.2 BLOCK DIAGRAM OF THE SYSTEM
3.3 SYSTEM OPERATION
3.4 CIRCUIT DIAGRAM
3.5 CIRCUIT DESCRIPTION
3.6 DESCRIPTION OF COMPONENTS USED
3.7 HOW TO CHOOSE A RIGHT INVERTER AND BATTERY
3.8 HOW TO CHOOSE THE BEST INVERTER BATTERY
CHAPTER FOUR
RESULT ANALYSIS
4.0 CONSTRUCTION PROCEDURE AND TESTING
4.1 CASING AND PACKAGING
4.2 ASSEMBLING OF SECTIONS
4.3 TESTING OF SYSTEM OPERATION
4.4 COST ANALYSIS
CHAPTER FIVE
5.0 CONCLUSION
5.1 RECOMMENDATION
5.2 REFERENCES
A 150–300 word synopsis of the main objectives, methods, findings, and conclusions of the Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH) should be included in the abstract.
Every chapter, section, and subsection in the research work should be listed in the Table of Contents, including the page numbers that correspond to each one.
The background, research question or hypothesis, and objective or aim of the Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH) should all be presented in the introduction, which is the first section.
A survey of previously conducted research on Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH) should be included in the literature review, together with an overview of the main conclusions, a list of any gaps, and an introduction to the current study.
The conclusion part should address the implications of the study, provide an answer to the research question and summarize the key findings.
The reference of Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH), which should be formatted following a particular citation style (such as APA, MLA, or Chicago), is a list of all the sources cited in the title.
Other important sections of the Design And Construction Of A 3.5KVA Power Inverter (with two 12V/100AH) should include the Title page, Dedication, Acknowledgments, Methodology, Results, Discussion, Appendices, Glossary, or Abbreviations List where applicable.