The Construction of Office Table and Chairs (PDF/DOC)
The aim of this project was to construct one office table and four chairs.
In the course of this project the length of plank used was 12” and we used about 4 number (mahogany) of 1” thickness, ¾ plywood of 1 sheet of 1” thickness, as well as ¼” plywood of ½ and glue 1 tin wenner 1 rod, foam ½ sheet. Fabrics 4 years, spraying materials and 21b of nail were utilized to effect the construction of office table and chairs.
The materials were marked out to the required sizes, cut, folded, fited, assembled, nail, mort iced and then spraying it finally to prevent corrosion attack
There are the necessary constructional procedure steps adopted in the project. The accuracy and precision with which the construction steps and consequently, the assemblage of the component parts greatly enhanced our aim of constructing a suitable equipment for use of one table and four chairs.
The aim of constructing the table and the chair is to enable chemical Engineering department as future Engineer to know and also learn how to construct an office table or chairs and the essence of it. The cost of production of the office table and chairs as at 7th August, 2005 is N21,000.00
A table is a piece of furniture consisting of a flat top supported on one or more legs. There are difference kinds of tables such as laboratory table, office table, dinning table, kitchen table etc. Office tables are mainly used when recording documenting certain events in the office. For instance a lecturer who is taken records of student examination, queeze must make use of office table/chair.
It could be made with different type of material such as wood, steel and some metals. In the construction of this project a mahogany wood as a material were used to construct the office table/chair. Wood as a material of construction has advantage over some metals. It is not attacked by termites or simple chemicals, which last longer than other metals. Since wood cannot be affected, the material kept on it will be saved. Metal are known to be corrode by the effect of a moisture and some chemicals but can be prevented by preventive measure like painting and coating of the table/chair during construction
Wood used for the construction was hard and resistant to termites and simple like chemicals as dil(HCL) and some base solution. A modern office table of standard sixe could contrain materials like books and some office documents.
A research was done so as to obtain the best design with the desired type of the structural material for the table to maintain its quality for a longer period of time without having any fault or change. Hence it is important to produce materials that will last longer and the quality to be of great importance in the construction of the office table chair. The various parts is arranged and form is such a way that it provides an efficient and economical procedure to the construction problem.
2.0 LITERATURE REVIEW
2.1 Introduction
The chapter presents a review of related literature that supports the current research on the Construction of Office Table and Chairs, systematically identifying documents with relevant analyzed information to help the researcher understand existing knowledge, identify gaps, and outline research strategies, procedures, instruments, and their outcomes…
TITLE PAGE
APPROVAL PAGE
LETTER OF TRAMITTAL
DEDICATION
ACKNOWLEDGEMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.1 Introduction
CHAPTER TWO
2.0 Literature Survey
2.1 Definition and types of table and chairs
2.2 Chemistry and structure of timber and wood
2.3 Chemical components of wood
2.4 Categories of wood
2.5 Categories of wood
2.6 Uses of wood
2.7 Structure of timber
2.8 Wood pattern making
2.9 Pattern makers tools
Materials
Dowel pins
Types of patterns
Core points and core boxes
Timber and wood carving
Toothed cutting tools
Foaming or steel square.
CHAPTER THREE
3.0 Constructional procedure
3.1 Cutting list
3.2 Sketching and Drawing
3.3 Cutting
3.4 Assembling
3.5 Sand papering
3.6 Paderded
CHAPTER FOUR
4.0 Discussion
4.1 Conclusion
4.2 Recommendation
4.3 Appendices
4.4 References
This Research Work On “Construction of Office Table and Chairs” Complete Material Can Be Downloaded Through Whatsapp, Email Or Download Link. Click The Below Button To Proceed:
This study on the Construction of Office Table and Chairs is solely for academic research purposes only and should be used as a research guideline or source of ideas. Copying word-for-word or submitting the entire project work to your school is unethical academic behavior and “UniProjects” is not part of it.