Repair Of A Faulty Refrigerator
(A Case Study Of Mechanical Engineering Department Of The Institute Of Management And Technology , Enugu)
This report covers all activities candied out to rehabilitate a faulty refrigerator.
First and foremost, we diagnosed the faulty refrigerator using the basic instruments to know the faults.
After which we bought the necessary standard items that caused the fault.
We then started work on it by replacing necessary instruments.
We finally listed it and found out that the objective was fully achieved.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
ii Title page
iii Letter of transmittal
iv Release page
v Approval page
vi Dedication
vii Acknowledgement
viii Abstract
TABLE OF CONTENTS
CHAPTER ONE
1.1 Introduction
1.2 The Refrigeration
CHAPTER TWO
2.1 Literature Review
CHAPTER THREE
Component Part of a Guide
3.1 Condenser
3.2 Evaporator
3.3 The Refrigerant
3.4 The Compressor
3.5 Capillary Thermostat and Strainer Other Part
CHAPTER FOUR:
Problems of a Refrigerator and Steps Taken To Rehabilitate It
4.1 Electrical Fault
4.2 Infective Sucking and Discharging
4.3 Open Circuit
4.4 Stoking
4.5 Frequent and Irregular Casing
4.6 Leakage
4.7 Step Taken To Rehabilitate It
CHAPTER FIVE:
Tool and Equipment Used To Rehabilitate a Refrigerator
5.1 Vacuum Pump
5.2 Manifold Gauge
5.3 Charging Valve
5.4 Avometer
5.5 Halge Leak Detector or Alcohol
5.6 Pinches off Tool
5.7 Wrenches
5.8 Sinaging Tool
CHAPTER SIX:
Rehabilitation / Repair Procedures
CHAPTER SEVEN
Economic Analysis
7.1 Material Cost
7.2 Labour Cost
7.3 Total Cost
Conclusion
Reference
This “Repair Of A Faulty Refrigerator” file contains 7 Chapters, 38 Pages and 4,499 Words.
The author of Repair Of A Faulty Refrigerator is written at the front page of the downloaded file.
To download this Repair Of A Faulty Refrigerator full file, click on “Download File” on top of this page and follow the next.