Home Control Switch Automation Using GSM Communication
The advantage of cellular communication like GSM technology is a potential solution for such remote controlling activities. GSM-SMS technology can be used to control household appliances from remote places. Remotely, the system allows the home owner to monitor and control his house appliances via his mobile phone set by sending commands in the form of SMS message and receiving the appliances status as well. This system provides ideal solution to the problems caused in situations when a wired connection between a remote appliance device and the control unit might not be feasible. The system is wireless and uses the user’s mobile handset for control and therefore the system is more adaptable and cost effective. The system uses GSM technology thus providing ubiquitous access to the system for appliance control. With this hypothesis, three different approaches have been proposed and implemented in this project; FIRSTLY, home control switch/household appliances are controlled by server mobile which acts as remote control. SECONDLY, GSM-SMS messaging technology is used to control them from remote places and FINALLY, to provide a multiple agents environment.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Certification
Dedication
Acknowledgement
Abstract
Table Of Content
Lists Of Figures
CHAPTER ONE
1.0 INTRODUCTION
1.1 Project Objective
1.2 Scope Of The Project
1.3 Operation Of The System
1.4 Architecture Of The System
CHAPTER TWO
2. 0 LITERURE REVIEW
2.1 System Description
2.1.1 User Gsm Mobile Handset
2.1.2 Receiver Gsm Handset
2.2 Microcontroller Board
2.3 Switching Module
CHAPTER THREE
3.0 SOFTWARE DESIGNING
3.1 Transformer
3.2 Transformer Calculation
3.3 Rectification Process
3.4 Microcontroller Section
CHAPTER FOUR
4.0 TESTING
4.1 System Testing
4.2 Packaging
4.3 Trouble Shooting The Design
CHAPTER FIVE
5.0 PROBLEM ENCOUNTERED
5.1 Precautions
5.2 Recommendation
5.3 Conclusion
5.5 Appendix
5.4 Programme Codes
5.6 Reference
This “Home Control Switch Automation Using GSM Communication” file contains 5 Chapters, 62 Pages and 7,123 Words.
The author of Home Control Switch Automation Using GSM Communication is written at the front page of the downloaded file.
To download this Home Control Switch Automation Using GSM Communication full file, click on “Download File” on top of this page and follow the next.