Fabrication Of Metal Shelf
Bookshelf, a Mechanical arrangement of materials were documents are stored, it could be made with metal or wood. But this one is fabricated with metal.
The type of metal used in the fabrication is mild steel and square baluters.
The undismountable bookshelf which has five partitions and four compartment under went many process namely, the drawing and the dimensioning of the bookshelf, needed materials, the marking out and cutting of the materials, welding, smoothing and filling of the work, then finally painting.
Actually our dreams has come through in fabrication of metal shelf that will be economically and at the same time meet up with the needed standard despite the subsidized rate.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title page
Letter of transmittal
Release
Approval page
Dedication
Acknowledgement
Abstract
Table of content
CHAPTER ONE
1.1 Introduction
1.2 Description of metal shelf
CHAPTER TWO
2.1 Material selection
2.2 Construction
2.3 Workshop sequence of operation
CHAPTER THREE
3.1 Material cost
3.2 Machine cost
3.3 Labour cost
3.4 Reporting
CHAPTER FOUR
4.1 Conclusion
4.2 Recommendation
4.3 Reference
This “Fabrication Of Metal Shelf” file contains 4 Chapters, 22 Pages and 2,322 Words.
The author of Fabrication Of Metal Shelf is written at the front page of the downloaded file.
To download this Fabrication Of Metal Shelf full file, click on “Download File” on top of this page and follow the next.