Design And Fabrication Of A Pilot Production Plant For Paints Emulsion And Texcoat
The concept of this project is to actualize a practical way of paint production using a locally design mixing machine which is design to meet a low cost and high standard paint.
The project cut across all forms of engineering, such as mechanical machine design of a simple industrial mixer, which is driven by an electrically made device, a 3 HP electric motor, chemically reacting reagents such as water, calcium carbonate, etc to produce the desired product which is aim to be used as coat for Mechanical Agricultural and Civil structures.
The project research exposes to students and entrepreneur to total knowledge necessary for the production of emulsion and texcoat using a single mixer irrespective of the volume of production. Self help project is the only sustainable solution to the problem of unemployment. Many unemployed youth can lay their hiring. The project research is a modest presentation of simplified facts on the for entrepreneur success at a low coat.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title page
Letter of transmittal
Authority page
Certification
Dedication
Acknowledgement
Abstract
Table of contents
CHAPTER ONE
Introduction
Objectives of the research work
Uses and economics
Importance of study
Benefits of the project
CHAPTER TWO
Literature review
Historical
Design of mixing machine
Recognition of need
Definition of problem
Planning for production
Planning for use
Process of design
Factors that determine choice of material
Packaging of product (ames paint)
CHAPTER THREE
Design of machine/sequence of operation
Design and construction details
Design factors/construction of the principles
Construction procedures
CHAPTER FOUR
Paint production
Latex paint
White wash
Paint composition
Paint constituents for emulsion
Quality control
Chalking, abrasion, hardness & adherence
Formation of emulsion paint 20 litres
Formation of texcoat (20 litres)
CHAPTER FIVE
Characteristics of the project
Performance of the project
Conclusion
Recommendation
References
This “Design And Fabrication Of A Pilot Production Plant For Paints Emulsion And Texcoat” file contains 5 Chapters, 41 Pages and 4,968 Words.
The author of Design And Fabrication Of A Pilot Production Plant For Paints Emulsion And Texcoat is written at the front page of the downloaded file.
To download this Design And Fabrication Of A Pilot Production Plant For Paints Emulsion And Texcoat full file, click on “Download File” on top of this page and follow the next.