Design And Construction Of An Electric Dice Display With Audio Unit
This work deals extensively with the design and construction of an electrodice display (EOD) with audio unit. The device displays the value of a ludo dice in numerical form and also produces sound as it displays the number.
The device works with principle of chance employed by ludo game players. The output of the display is usually very rapid that the player does not actually see the number when the device is switched ON so that it will purely be a game of chance. When the off key is pressed, a particular number is displayed and this number is the number the player got.
The operation of the device starts by the generation of a pulse frequency. The pulse frequency (square wave signal) is generated by times (555 timer) by connecting in unstable multi-vibrator. The output from the timer is used in clocking the binary counter (mode 10 counter) but this counter is biased in the mode 10 counter, the output from Qo, Q1 and Q2 were connected to the reset pins so that once the counter finishes the count of six of goes back to zero.
The result from the binary counter is then fed to the decoder / driver before connecting it to seven segment so that the decoder will be able to convert the binary values to the decimal values that are being used in the ludo game dice. The seven segment then displays the numbers by lightening the diodes that make up that particular.
This device is being regulated by a latch (4-edge triggered flip-flop which has two switches, one is used for putting the power supply and the other two push switches for the working of the dice display.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Cover page
Title page
Approval page
Dedication
Acknowledgement
Abstract
Organization of work
List of figures
List of table
CHAPTER ONE
INTORDUCTION
1.0 Statement of problem
1.1 Purpose of study
1.2 Aim and objectives
1.3 Scope of the study
1.4 Limitations of the study
1.5 Definitions of terms.
CHAPTER TWO
LITERATURE REVIEW
CHAPTER THREE
DESCRIPTION AND ANALYSIS OF THE EXISTING SYSTEM FACT FINDING METHODS
Organization structure
Objectives of the existing system
CHAPTER FOUR
DESIGN OF THE NEW SYSTEM
Output specification and design
Input specification and design
File design.
Procedure chart
System flow chart
System Requirement.
CHAPTER FIVE
IMPLEMENTATION
Program Design
Program Flowchart
Pseudocodes
CHAPTER SIX
DOCUMENTATION
CHAPTER SEVEN
RECOMMENDATION
CONCLUSION
REFERENCE
This “Design And Construction Of An Electric Dice Display With Audio Unit” file contains 7 Chapters, 59 Pages and 7,830 Words.
The author of Design And Construction Of An Electric Dice Display With Audio Unit is written at the front page of the downloaded file.
To download this Design And Construction Of An Electric Dice Display With Audio Unit full file, click on “Download File” on top of this page and follow the next.