Design And Construction Of An Automatic Battery Charger ABC
The practical importance of a battery charging unit in today’s world cannot be over emphasized. This is so since these batteries or accumulators are immensely needed by automobiles and in science laboratories. This thesis describes the methodical approach to the design and construction of any battery changer. However the procedure developed cover the construction of battery charger for battery sizes ranging from 6 volts to 12 volts.
The phototype of a battery charger for these ranges of battery has been implemented following the methodical approach as outlined in this thesis and its operational test results are quite satisfactory.
Adequate care has been taken in the design and construction to ensure that the resultant battery charger is both reliable and easy to use.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Certification
Dedication
Acknowledgement
Abstract
Chapter One
1.0 Introduction
Chapter Two
2.0 The Storage Battery
2.1 Battery
2.2 The Storage Battery Accumulator
2.3 Nickel – Iron (Nife) Accumulator
2.4 Lead – Acid Accumulator
2.5 Active Material Of Lead – Acid Cell
2.6 Lead Peroxide (Pbv2)
2.7 Sponge Lead (Pb)
2.8 Dilute Sulphric Acid
2.9 Chemical Changes
2.10 Discharging Of A Battery
2.11 Indication Of A Fully Charged Cell
2.12 Casing
2.13 Voltage
2.14 Specification Gravity Of The Electrolyte
Chapter Three
3.0 Power Supply Unit
3.1 Component Of The Power Supply Unit
3.2 Ac – Dc Rectification
3.3 Automatic Cut Off Circuit
Chapter Four
4.0 The Battery Charging
4.1 Method Of Charging
4.2 Constant – Voltage Method
4.3 Operation Of The Charger
4.4 Battery Charger’s Casing
Chapter Five
5.0 Summary, Conclusion And Suggestion For Further Improvement
5.1 Summary
5.2 Conclusion
5.3 Cost Of Production
References
This “Design And Construction Of An Automatic Battery Charger ABC” file contains 5 Chapters, 31 Pages and 3,237 Words.
The author of Design And Construction Of An Automatic Battery Charger ABC is written at the front page of the downloaded file.
To download this Design And Construction Of An Automatic Battery Charger ABC full file, click on “Download File” on top of this page and follow the next.