Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer

6 Chapters
|
26 Pages
|
3,047 Words

This is a technical project write-up design and construction were carried out by me with deep intensive and extensive research work under the strict supervisor of Engr K.C Ugwu.
I all give credit to the authors of the textbooks whose I referred to in the cause of writing this project and its subsequent design and construction. In this project, I shed light on the basic principle of operation, the design and construction procedure.
Critical analysis of all the functional parts of the transformer and rectifier connected to it. It will therefore, be of great in serest and suitable to all electrical engineers and engineering students.

Click here to download full ‘Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer’ file or Click here to view Table of Content.

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Cover Page
Approval Page
Dedication
Acknowledgement
Abstract
Table Of Content

Chapter One
1:0:0 Introduction

1:1:0 Objective
1:2:0 Scope Of Work

Chapter Two
2:0:0 Literature Review

2:1:0 Description Of Transformer
2:2:0 Classification Of Transformer
2:3:0 Types Of Transformer
2:4:0 Division Of Transformer

Chapter Three
3:0:0 Purpose Of The Device

3:1:0 Division Of Transformer
3:2:0 Uses
3:3:0 Significance Of Transformer (Device)

Chapter Four
4:0:0 Construction Of Transformer

4:1:0 Cutting Of Lamination
4:2:0 Construction Of Former
4:3:0 The Winding
4:4:0 Insulation
4:5:0 Construction Of Rectifier
4:6:0 Materials Used

Chapter Five
5:0:0 Principle Of Operation

5:1:0 Major Factor Considered
5:2:0 Rectifier Operations
5:3:0 Components Used
5:4:0 Connection Of Transformer To Rectified

Chapter Six
6:0:0 Conclusion

6:1:0 Summary
6:2:0 Problem Encountered
6:3:0 Recommendations
Bill Of Quantity

The ‘Table of Content’ ends here, Click here to download ‘Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer’ Project material.

Share Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer On:

FREQUENTLY ASKED QUESTIONS

This “Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer” file contains 6 Chapters, 26 Pages and 3,047 Words.

The author of Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer is written at the front page of the downloaded file.

To download this Design And Construction Of A 220 12 Volts Single Phase Step Down Transformer full file, click on “Download File” on top of this page and follow the next.