Design And Construction Of A 2000w Inverter

5 Chapters
|
70 Pages
|
8,363 Words

A 1.25KVA (2000W) inverter generator was designed, constructed and certified Ok.
In this project, the design of the inverter generator is aimed at satisfying the need of converting, a D.C source of supply (12v battery) to an A.C voltage of 220v.
The inverter range of output is between 200-220v.
Since the inverter was designed to step-up voltage, the power transformer is being used as step-down transformer for charging and as step-up transformer for inverting.
The control circuit ensures appropriate switching of the input voltage from mains supply to the taping of the transformer for charging.

Click here to download full ‘Design And Construction Of A 2000w Inverter’ file or Click here to view Table of Content.

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Title Page
Acknowledgement Sample
Dedication Sample
Abstract
Table Of Content

CHAPTER ONE
1.0 Introduction

1.1 Analysis/ Review Of Existing System
1.2 Aims And Objectives
1.3 Scope/Limit Of The Project
1.4 Application

CHAPTER TWO
2.0 Literature Review

2.1 Brief Review Of Principle Behind This Project
2.2.1 Capacitor
2.2.2 Resistors
2.2.3 Relays
2.2.4 Transistor
2.2.5 Diode
2.2.6 Switches
2.2.8 Operational Amplifiers (Op-Amp)
2.2.9 Transformer
2.2.10 A.C Volatge Meter
2.2.11 Cd 4047 (Multivibrator)
2.2.12 Mosfet

CHAPTER THREE
3.0 Mode Of Operation And Basic Components Used

3.1 Methodology 1
3.1.2 Regulator
3.1.3 Control Logic
3.1.5 Phase Splitter
3.1.6 Driver Section
3.1.7 Step-Up Transformer
3.1.8 Output Stage
3.2 Methodology 2
3.2.1 Input Stage
3.2.2 Isolating Relay
3.2.3 Step Down Transformer
3.2.3 Rectifier Circuit Via Mosfet
3.3 Theory And Calculation Of Tranformer
3.4 Core Dimension

CHAPTER FOUR
4.0 Construction Testing And Result

4.1 Problems Encountered

CHAPTER FIVE
5.0 Conclusion

5.1 Recommendation
Reference

The ‘Table of Content’ ends here, Click here to download ‘Design And Construction Of A 2000w Inverter’ Project material.

Share Design And Construction Of A 2000w Inverter On:

FREQUENTLY ASKED QUESTIONS

This “Design And Construction Of A 2000w Inverter” file contains 5 Chapters, 70 Pages and 8,363 Words.

The author of Design And Construction Of A 2000w Inverter is written at the front page of the downloaded file.

To download this Design And Construction Of A 2000w Inverter full file, click on “Download File” on top of this page and follow the next.