Construction Of Kerosene Cooking Stove
The purpose of the construction is aimed at producing heat energy for commercial use by turning liquid fuel(kerosene).the construction was successful by appropriate selection of engineering material favourably mild steel(blacksheet) and steel iron for special p2rts.
The technological properties passed by the chosen mild steel are; machinability ,weldability,durability,andformability.mech2nude properties includem2llebillity,duetility,st2tic strength and high tensile strength .
The sequence of operation followed by the construction are; Literature review, material selection-fabrication evaluation and possible redesign and modification. The fabrication processes of the metallic material includes the making out, cutting bending hammering, joining, welding, grazing, smothering and finally printing.
A consideration of the operational environment which the store will function was taken into account and a material selection which has the ability of being prevented by coating from corrosion –mild steel was chosen.
After the construction, the operational efficiency was tested and is 92% effective that is, produces bluish flame which indicates that the aim of the construction was achieved.
The costing, which is the overriding factors, was tabulated headed under material costing labour costing and overhead costing.
Mode of operation of the store and the precautionary measure was also included in order to give the store a maximum service life.
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
TITLE PAGE
LETTER OFTRANSMITTAL
APPROVAL PAGE
DEDICATION
ACKNOLEGEMENT
ABSTRACT
TABLE OF CONTENTS
CHAPTER ONE
1.0 INTRODUCTION
CHAPTER TWO
1.1LITERATURE REVIEW
1.11A REVIEW OF KEROSINE
1.12 A REVIEW OF KEROSINE EXPLOSION
1.13 BURNING VELOCITY MEASUREMENT
1.14 A BRIEF LITERATURE REVIEW ON FOSSIL FUEL
(A) FOSSIL FUELS
(B) CHARACTERISATION OF FOSSIL FUEL
(C) COMBUSTION OF FOSSIL FUELS
(D) COMBUSTION OF LIQUID FUELS (KEROSINE)
(E) COMBUSTION STOICHIMETRY
(F) THEORTICAL AIR AND CARBONDIOXIDE FOR COMBUSTION OF INDUSTRIAL FUELS.
1.15HHEAT( FIRE) PROCESS EQUIPMENT
(A)DIRECT FIRED PROCESS EQUIPMENT
(B)INDERECT FIRED (HEAT) PROCESS
1.16 A REVIEW- LITERATURE ON CONSTRUCTIONAL ENGINEERING MATERIALS
(A) IRON AND STEEL
(B) STEEL
(C) CLASSIFICATION OF STEEL
(D) HARDENABILITY AND THE INFLUENCE OF ALLOYING ELEMENTS IN STEEL.
(E) CRITICAL YEMPERATURES IN PLAIN CARBON STEEL
(F) TOOL SHEEL
(G) MARAGING STEEL
(H) HIGH ALLOY CORROSION SCALE STEEL
1.17 MECHANISM OF STOVE OPERATION
1.18 PROPERTIES OF MATERIALS FOR CONTRUCTION OF KEROSENE STOVE
CHAPTER THREE
3.1 CONSTRUCTIONAL PROCESS AND CARE OF THE STOVE.
3.2 CONTRUCTIONAL PROCEDURES
3.3 DETAILS OF THE CONTRUCTION – COMPONENTS
3.3.1 FABRICATION OF THE BURNER
3.3.2 STEPS OF FABRICATING STOVE JACK
3.3.3 STEPS FOR FABRICATING THE STOVE CASINE
3.3.4 CONSTRUCTION OF THE BODY
3.3.5 PAINTING.
CHAPTER FOUR
COSTING
4.1 MATERIAL COST
4.2 LABOUR COST
CHAPTER FIVE
5.1 DISCUSSION
5.2 CONCLUSION
5.3 RECOMMENDATION
5.4 REFERENCES
This “Construction Of Kerosene Cooking Stove” file contains 5 Chapters, 58 Pages and 6,645 Words.
The author of Construction Of Kerosene Cooking Stove is written at the front page of the downloaded file.
To download this Construction Of Kerosene Cooking Stove full file, click on “Download File” on top of this page and follow the next.