Construction Of A Wooden Bookshelf
This project work inmvolves the construction of a bookshelf that is going to be use for storing of books and it is being constructed with wood and nail.
The wood used for the construction was seasoned mohagany wood that has preservatives and without defect.
During the construction of the bookshelf both mechanical processes was used to produce a suitable bookshelf.
The following are some of the tools and equipment used in the construction which includes hammer or driving the nails, saws for cuttinfg the woods, chisels and mallet for –opening the joints, some of the joints used in the construction includes a vertical and horizontal member of the shelves, terron joints, butt joints at the top cover member of the shelf and box joint.
The bookshelf is provided with a glass door at the front side of it and the frame of the glass have a key for purpose of locking to avoid unwanted persons from having access to anything stored in the bookshelf and the lower side of the bookshelf is constructed in a drawer foremost having ke9ys and handles.
The back of the bookshelf is made with a plywood and top, down and other components of it is made up of soft and hard woods with different dimensions.
The total width of the bookshelf is 1500mm (5ft) and the total light of the bookshop is 2100mm (7ft).
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title page
Approval page
Dedication
Acknowledgement
Table of content
CHAPTER ONE
1.0 Introduction
1.1 Aims and objectives of the study
1.2 Scope of the study
CHAPTER TWO
2.0 Literature review
2.1 Wood as a construction material
2.2 Classification of woods
2.3 Water contents of woods
2.4 Seasoning of wood
2.5 Methods of seasoning
2.7 Joints in timber
2.8 Historical development of timber
2.9 Types of Bookshelf
2.10 Uses of bookshelf
2.11 Maintenance of Bookshelf
CHAPTER THREE
3.0 Methodology
3.1 Materials and equipment needed
3.2 Preparation of the materials in the construction –
3.3 Assembles of the materials
3.4 Joining and fastening
3.5 Fastening
3.6 Safety precaution taken in preparation of bookshelf
CHAPTER FOUR
4.0 Presentation and discussion of result
4.1 Isometric view of the bookshelf
4.2 Front view of the bookshelf
4.3 Structural design of the bookshelf
CHAPTER FIVE
5.0 conclusion
5.1 Recommendation
5.2 References
This “Construction Of A Wooden Bookshelf” file contains 5 Chapters, 39 Pages and 4,702 Words.
The author of Construction Of A Wooden Bookshelf is written at the front page of the downloaded file.
To download this Construction Of A Wooden Bookshelf full file, click on “Download File” on top of this page and follow the next.