Construction Of A Screw Conveyor With A Single Phase Electric Motor

5 Chapters
|
33 Pages
|
4,215 Words

In the society at large Technology is fast replacing the crude method of carrying out work and has been making room for employment. Besides, it has also caught the attention of the youths who will prefer to work in a company with technological operations than one with man-power operations. This project can be used to convey materials ranging from those in powdery forms grit forms, and stones in the size of crushed granites. If applied to the foundry technology practical (sand mould) under gone by the department. The lecture will experience ease in carrying out his lecture as well as satisfaction since there would not be lack of sand as this can be seen to, by an attendant and the lectures will have all the student of the Department in attendance.

Click here to download full ‘Construction Of A Screw Conveyor With A Single Phase Electric Motor’ file or Click here to view Table of Content.

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Title page ii
Little of transmittal iii
Release iv
Signature v
Approval vi
Dedication vii
Acknowledgement viii
Table of content ix
Abstract xi

CHAPTER ONE
1.1 Introductions 1
1.2 Description of the screw conveyor 2

CHAPTER TWO
2.1 Mode of operation 4
2.2 Material selections 6

CHAPTER THREE
3.1 design 7
3.2 design analysis 7
3.3 principle of operation 9
3.4 capacity of the screw conveyor 10
3.5 sequence of operation/ construction 11

CHAPTER FOUR
4.1 assembling of the conveyor 37
4.2 cost analysis 38

CHAPTER FIVE
5.1 conclusions 41
5.2 recommendations 41
5.3 references 42

The ‘Table of Content’ ends here, Click here to download ‘Construction Of A Screw Conveyor With A Single Phase Electric Motor’ Project material.

Share Construction Of A Screw Conveyor With A Single Phase Electric Motor On:

FREQUENTLY ASKED QUESTIONS

This “Construction Of A Screw Conveyor With A Single Phase Electric Motor” file contains 5 Chapters, 33 Pages and 4,215 Words.

The author of Construction Of A Screw Conveyor With A Single Phase Electric Motor is written at the front page of the downloaded file.

To download this Construction Of A Screw Conveyor With A Single Phase Electric Motor full file, click on “Download File” on top of this page and follow the next.