Construction Of 150 Watts 162 Audio Loudspeaker
Audio loudspeaker (output transducer) is on of the most essential and powerful device used in telecommunication system. This is device capable of converting electrical signal into sound and vice versa. It is made up of few time of non-magnetic wire wound on a light cylindrical former that is mounted so that it can move freely insides the magnetic field of a strong permanent magnet. The speaker cone it attached to the voice coil and attached with a flexible mounting to outer ting of the speaker support.
The device was contracted and operated based on the principles of electromagnetic induction which was clearly stated by faradays and langue laws of electromagnetic induction. This speaker has power rating of low watts and 16ohms impedance
The materials used in made up of particle board of ¾ thickness tweeter and cross over network..
This device constructed locally can compete favourably well with the imported one (with international standard) the information in this write up comprises of the construction operation a detailed information of each component parts and various used of output transducer (loudspeaker).
NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.
Title Page
Certification
Dedication
Abstract
Table Of Content
Chapter One
1.0 Introduction
1.1 Background Information
1.2 Aim
Chapter Two
2.0 Literature Review
2.1 Function Of Various Parts Of Loudspeaker
2.2 Working Principles Of A Loudspeaker
Chapter Three
3.0 Meaning Of Crossover
3.1 Component Parts Of Crossover
3.2 Crossover Design
3.3 General Methodology Of Crossover Design
Chapter Four
4.0 Meaning Of A Tweeter
4.1 Operation Of A Tweeter
4.2 Dome Fluid
4.3 Ferro Fluid
4.4 Types Of Tweeter
Chapter Five
5.0 Enclosure
5.1 Requirement Of Speaker Enclosure
Chapter Six
6.0 Conclusion
6.1 Speaker Safety
6.2 Cost Of Construction
6.3 Discussion
References
This “Construction Of 150 Watts 162 Audio Loudspeaker” file contains 6 Chapters, 37 Pages and 5,418 Words.
The author of Construction Of 150 Watts 162 Audio Loudspeaker is written at the front page of the downloaded file.
To download this Construction Of 150 Watts 162 Audio Loudspeaker full file, click on “Download File” on top of this page and follow the next.