Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking

(A Case Study Of Ugwuaji Campus M, Imt; Enugu)

6 Chapters
|
31 Pages
|
3,145 Words

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Title Page
Approval Page
Certification
Dedication
Preface
Acknowledgement
Table of Contents

CHAPTER ONE
1.0 Collection of Sample and Laboratory Testing Program

CHAPTER TWO
2.0 Mechanical Analysis

CHAPTER THREE
3.0 Compacting Test

CHAPTER FOUR
4.0 Atterberg Limit Test
4.1 Liquid Limit
4.2 Plastic Limit

CHAPTER FIVE
5.0 Califorms Bearing Ration (CBR) Test

CHAPTER SIX
6.0 Analysis Conclusion and Recommendation
6.1 Flexible Pavement Design
6.2 Bibliography

 

The ‘Table of Content’ ends here, Click here to download ‘Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking’ Project material.

COLLECTION OF SAMPLES AND LABORATORY TESTING PROGRAM
The test carried out in this project was on distributed soil sample.
This implies collecting soil samples that are disfigured their natural shape.
Soil samples were collected on three (3) trial pit along Ugwuaji and Campus 111 IMT Enugu. A total of three (3) samples were collected from the trial pits (one from each pit) using pick are and spade. The samples were taken at 1.0m depth in each pit. The samples were put in polythene bags and labelled A, B, C. The samples were spread on the floor of the soil laboratory and stones removed for seven (7) days to allow for air drying.
The laboratory testing program comprises mechanical analysis, compaction test and atterberg limit tests, and the California bearing ratio (CBR) test.
The objectives of the laboratory testing program were
1. To obtain a general information regarding the nature of the soil and their variation with depth throughout the length of the road under consideration.
2. To obtain information regarding the strength characteristics of the soil.
3. To obtain information which will enable engineers to group soils according to their appearances of the purposes of complying different soils.

 

Share Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking On:

FREQUENTLY ASKED QUESTIONS

This “Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking” file contains 6 Chapters, 31 Pages and 3,145 Words.

The author of Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking is written at the front page of the downloaded file.

To download this Basic Soil Test On Sub-Grade Soil Material & Flexible Pavement Design On Road Linking full file, click on “Download File” on top of this page and follow the next.