Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis

(A Case Study Of Federal Medical Center, Bida)

5 Chapters
|
52 Pages
|
6,245 Words

This project is aimed at the automation or computerization of the diagnosis and treatment of tuberculosis “a case study of Federal Medical Center, Bida” its patient are to be diagnosed using computer platform instead of using patient sputum samples to generate result  for treatments. This project was accomplished using the modernized version of Q basic and basic (beginner’s all-purpose symbolic instruction code) programming language called the visual basic 2010, and micro soft access as the database.  The scope of the work is only to diagnose and treat tuberculosis disease only. And this is to be achieved by using patient’s symptoms to determine if the patient is a carrier or not. The advantages of this system are that its saves time, it helps in accurate record keeping and its help human effort. The programmed code was developed, tested and a sample of output result is attached in the appendix. And procedure for the program installation has been included as well as recommendation for effective and optimum performance.

 

Click here to download full ‘Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis’ file or Click here to view Table of Content.

NOTE: Preview the following Table of Content before you download the full content. WYSIWYG – What You See Is What You Get.

Certification Page

Dedication

Acknowledgement

Abstract

Table of content

 

CHAPTER ONE

1.0 General overview  1

1.1 Introduction  1

1.2 Statement of problem  4

1.3 Aim and Objectives 5

1.4 Scope and Limitation  6

1.5 Significance of the study 6

1.6 Definition of terms  7

 

CHAPTER TWO                                                                                                      

2.0 Literature Review and System Analysis

2.1 Literature Review  9

2.2 Feasibility Study  12

2.3 System Analysis  14

2.3.1 Fact Finding  14

2.4  Analysis of the Existing System  15

2.5  Statement of Problem/Problems of the Existing System  16

2.6 Solution to the Problem  18

 

CHAPTER THREE                                                                                       

3.0 System Design  19

3.1 Architectural Design  19

3.2 Abstract Specification  19

3.3 Interface Design  20

3.4 Data Structure Design  22

3.5 Algorithm Design  22

 

CHAPTER FOUR

4.0 System Implementation and Documentation   23

4.1 System Implementation  23

4.2 Choice of Programming Language  23

4.3 SystemRequirement  24

4.3.1 Installation Requirement  24

4.3.2 Hardware Requirement  24

4.3.3 Software Requirement  25

4.4 Process of Installation  25

4.5 System Testing  26

4.6 System Change Over  27

4.7 System Documentation  28

 

CHAPTER FIVE

5.0 Summary, Conclusion and Recommendations 29

5.1 Summary  29

5.2 Conclusion  29

5.3 Recommendation  30

REFERENCES  32

Appendix A (Flow Charts)  35

Appendix B (Program Interfaces)  37

Appendix C (Some Program Codes)  41

 

The ‘Table of Content’ ends here, Click here to download ‘Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis’ Project material.

Share Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis On:

FREQUENTLY ASKED QUESTIONS

This “Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis” file contains 5 Chapters, 52 Pages and 6,245 Words.

The author of Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis is written at the front page of the downloaded file.

To download this Automation Or Computerization Of The Diagnosis And Treatment Of Tuberculosis full file, click on “Download File” on top of this page and follow the next.