Biochemistry | Chemistry

Economic Importance Of Rusting Of Iron

This research work on “Economic Importance Of Rusting Of Iron” is available in PDF/DOC. Click the below button to request or download the complete material

Chapter One

1.0 Introduction

Rusting is the corrosion of iron which is the most widely used structural metal. Most of it is used in making steel. The wide range of products made from steel includes all types vehicles, machinery pipeline, bridges and reinforcing rods and girders for construction purposes.

Rusting is due to electrochemical reaction, it require the presence of both air i.e oxygen and water. Like the electrochemical cell, electrons given up from anode of an iron atom flow (through metal ) to cathode and reduces the oxygen being dissolved in the water layer to give OH-

Therefore, rusting causes enormous econom ic problem and is reason why extensive measures of rusting/corrosion protection have to be developed

1.1 Rust In History

To the great majority of people, corrosion means rust, an almost universal object of hatred. `Rust’ is, of course, the name which has more recently been specifically reserved for the corrosion of iron, while `corrosion’ is the destructive phenomenon which affects almost all metals. Although iron was not the first metal used by man, it has certainly been the most used, and must have been one of the first with which serious corrosion problems were obtained. It is not, therefore, surprising that the terms corrosion and rust are almost synonymous.

The great Roman philosopher, Pliny, AD 23-79, wrote at length about ferrum corrumpitur, or spoiled iron, for by his time the Roman Empire had been established as the world’s foremost civilization, a distinction due partly to the extensive use of iron for weaponry and other artifacts.

The Romans must have been vexed by the susceptibility of iron to rust, for, in true scientific fashion, Pliny asked himself the question: why should iron corrode more easily than other metals? Lacking the ability to investigate the problem experimentally, he arrived at the metaphysical solution that it is because iron is both the best and the worst of man’s servants.

Although very useful domestically, it is also the metal of war, slaughter and brigandage.

In other words, Pliny considered the rusting of iron to be a punishment of the gods, as the metal allows itself to be used for swords an other war purposes.

1.2 Iron and It’s Properties:

Iron

Is the second most abundant metal found in earth’s crust after aluminum and it is the most common metal that is found around us, therefore, its corrosion is of special significance.

Iron is an alloy of steel i.e a mixture of iron and carbon and it is the most widely used metal, such as in vehicles motorcycles, bicycles, machineries, pipelines, bridges and girders for construction purposes etc.

Iron being a special element corrodes; its corrosion is know as “rusting” and is of special significance.

Properties of Iron

Iron has chemical and physical properties which some of it react with oxygen and water to produce rust and which enable it to be useful for many purposes.

Physical Properties

  1. It is a silvery solid
  2. It is malleable
  3. It is ductile
  4. Has a meeting point of 15300c
  5. It conducts electricity e.t.c

Chemical Properties

  1. Reaction with air: When iron is exposed to moist air, it gradually rust, due to the formation of hydrated iron (III) Oxide (Fe203. XH20) 4FE(S) +302(g)+2xH20 2Fe203.xH2O(Rust)
  2. Reaction with steam : When steam is passed over red-hot iron fillings, iron (ii) diiron (iii) oxide and hydrogen are produced 3Fe(s) ¬+ 4H20(G) = Fe3304(s) + 4h2(g)
  3. Reaction with non-metals:- When heated, iron readily combines with chlorine to give iron (iii) chloride.
    2Fe(s) + 3cl2(g) 2Fecl3 (s)

1.3 Definition of Rusting and Rust:

Rusting

Is the corrosion of iron. As iron is the most widely used metal in the world , rusting is the most common type of corrosion. Iron rusts by combining with oxygen in the presence of water to from brown hydrated iron (iii) oxide (commonly known as rust), Fe2 03.XH20

Rust:

Is a general term used for describing iron oxides.

The terms is applied to red oxides, formed by the reaction of iron and oxygen in the presence of water or air moisture.

Forms of Rust

  • Reaction of iron and oxygen in the presence of water or air moisture to produce brown hydrated iron (iii) oxide
  • Reaction of iron and chloride, in an environment deprived of oxygen
You May Like These Research Topics
Academic Research Structure: Important Sections

A 150–300 word synopsis of the main objectives, methods, findings, and conclusions of the Economic Importance Of Rusting Of Iron should be included in the abstract.

Every chapter, section, and subsection in the research work should be listed in the Table of Contents, including the page numbers that correspond to each one.

The background, research question or hypothesis, and objective or aim of the Economic Importance Of Rusting Of Iron should all be presented in the introduction, which is the first section.

A survey of previously conducted research on Economic Importance Of Rusting Of Iron should be included in the literature review, together with an overview of the main conclusions, a list of any gaps, and an introduction to the current study.

The conclusion part should address the implications of the study, provide an answer to the research question and summarize the key findings.

The reference of Economic Importance Of Rusting Of Iron, which should be formatted following a particular citation style (such as APA, MLA, or Chicago), is a list of all the sources cited in the title.

Other important sections of the Economic Importance Of Rusting Of Iron should include the Title page, Dedication, Acknowledgments, Methodology, Results, Discussion, Appendices, Glossary, or Abbreviations List where applicable.