Agricultural Engineering | Agricultural Bio Environmental Engineering

Fabrication Of Electrical Pop Corn Machine

This research work on “Fabrication Of Electrical Pop Corn Machine” is available in PDF/DOC. Click the below button to request or download the complete material

Overview

ABSTRACT

An electric pop corn machine is a machine that is used to pop com for human consumption. It uses electricity as its source of energy, transfer heat energy, that is used to rotate due to the convention of electrical energy from the source to mechanical energy in the motor, the stirrer turns the corn so that it will not burns.

This project went as far as meeting most of the requirement of advancement in technology, which lead to make work easy and comfortable for the user.

To be candid, the burden of mankind because of the existence of technology for this reasons, the government is expected to encourage the young technologist and engineers who has graduated and those who are yet to be graduated from school. By providing them with financial assistance, installation of functional and adequate equipment and facility various installations, competent and qualified personnel and in addition making education free for those who are not financially buoyant. By so doing, we will be boasting of technological advancement if we are ready to adopt indigenous technical experience rather than that of western one, which rather more expansion and at-time in appropriate.   

This project is divided into five chapters, chapter one: introduction, literature review, specification of problem which include requirement of the design, condition for use, characteristic, appearance.

Chapter two: Description of components parts, Body frame work and various types of heating element and material needed for construction.

Chapter three: comprises assembly, principles of operation and control.

Chapter four: Precaution and theory of analysis.

Chapter five: recommendation and conclusion together with references.    

TABLE OF CONTENTS

Title Page                                                                         i

Certification                                                                     ii

Dedication                                                                       iii

Acknowledgement                                                            vi

Abstract                                                                           v

Table of contents                                                             vii

CHAPTER ONE

INTRODUCTION

  • The Background of the Project 1
  • Literature Review 1
  • Specification of Problems 2
  • Requirement of Design 2
  • Condition for Use 2
  • Characteristics 3
  • Appearance 3

CHAPTER TWO

2.1 Description of component part                                  5

2.2 Body frame work                                                                5

2.3 Material needed for construction                                       7

2.4 Various types of heating element                                       8

2.4.1 A pan with a lid on it                                              9

2.4.2 Microwave pop corn machine                                 9

2.4.3 An open fire pop corn machine                                       10

2.4.4 Hot air pop corn machine                                               11

2.4.5 Manually operated pop corn machine                     11

2.4.6 Electrically operated pop corn machine                  11

2.5 Best of the project                                                      12

CHAPTER THREE

3.1 Assembly and finishing                                             13

3.2 Principles of operation and control of pop corn machine 14

3.2.1 The aluminum pot                                                  14

3.2.2 Lifting mechanism                                                  14

3.2.3 The stirring mechanism                                          15

3.2.4 Principle of operation                                              15

CHAPTER FOUR

4.1 Precaution                                                                         17

4.2 Theory of design and analysis                                    17

CHAPTER FIVE

CONCLUSION AND RECOMMENDATION                         19

5.1 Conclusion                                                                        19

5.2 Recommendation                                                       19

CHAPTER ONE

INTRODUCTION

  • The Background of The Project

The basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn.

Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition.

The design and construction of pop corn machine is brought from the perspective of its availability in market.

Also this project is also a means of promoting the diversity in utilization to suit different taste.

1.2   This is the past related work that has been carried out before this project and which are relevant to this project.

Therefore, for the past few years, several processes have been proposed for producing pop-corn machine in commercial use other than local ones i.e (Electrically popcorn machine and natural fire of heat pop corn machine).

  • Specification of Problem
    • Requirement of the Design

The design is expected to achieve the following objective:-

  • Production of pop corn in long scale
  • Increase the efficiency of producing pop corn
  • Moderate the rotation of the stirrer by using right motor
  • To reduce the heat that will be lost by logging the out put
  • To regulate the voltage used to produce popcorn
  • The presence of bulb to enhance production at night
    • Condition For Use
  • The machine might be used under elevated temperature
  • The machine should be store after used in a clean and dry place
  • Routines clean would be necessary to avoid rusting of the pot
  • The motor should be service from time to time to maintain its efficiency

1.3.3 Characteristic

The machine should not be heavy, the machine should not be big to enhance effecting stirring. The distance between the pots should not be too large to reduce heat loss. Aluminum should be used for both the frame profile and the construction of the stirrer. Glass should be used due to the case because of the transparency.

1.3.4 Appearance

The product should have a glistening appearance which can attract the prospective consumer of the pop corn.

Reliability and life

The expected useful life in normal circumstances should be less than 10 years.

 LIMITATION

  • There was no conveyor that should remove the popcorn from the hot pot
  • There was no time to indicate when the corn is fully popped
  • There was no thermostat to regulate the temperature of the system
  • There was nothing like lagging to trap some of the heat

CHAPTER FIVE

CONCLUSION AND RECOMMENDATIONS

5.1   Conclusion

  • After testing the machine, we discovered that we are able to pop higher amount of popped coin due to the fact that pot is bigger than the previous ones constructed.
  • Stirrer touches all the botton part of the pot
  • A detachable container is constructed so as to reduce the wastage of pop-corn when transferring from pot to the containers.

Also my conclusions give me the room for production of high demand of pop-corn

5.2   Recommendation

From the experience and the operation carried out during the process of this project is here by Recommended that, process of the pop‑ corn machine is made to be electrically operated for popping of corn.

  • Also, in order to improve effective and high standard reputable project, continue improvement should be constantly made
  • It is recommended that project for every out going student should make it in a way such that it will meet the standard of improved ones.
  • The container should be well lagged so that heat transfer by conductive from the heating element will be reduce.
  • The polytechnic and departmental authority should make more buildings available necessary machine and the maintenance of this machine for engineering student should be provided. Most especially the Mechanical Engineering student.
  • In view of the problems, recommendation and suggestions can be made, that the institution authority should build more workshop and provide necessary and enough equipment and machines because it is my hope that this project would meet the needs of students, industries and other research centre in their quest for basic training on production, fabrication and operations of pop‑ corn machine.
You May Like These Research Topics
Academic Research Structure: Important Sections

A 150–300 word synopsis of the main objectives, methods, findings, and conclusions of the Fabrication Of Electrical Pop Corn Machine should be included in the abstract.

Every chapter, section, and subsection in the research work should be listed in the Table of Contents, including the page numbers that correspond to each one.

The background, research question or hypothesis, and objective or aim of the Fabrication Of Electrical Pop Corn Machine should all be presented in the introduction, which is the first section.

A survey of previously conducted research on Fabrication Of Electrical Pop Corn Machine should be included in the literature review, together with an overview of the main conclusions, a list of any gaps, and an introduction to the current study.

The conclusion part should address the implications of the study, provide an answer to the research question and summarize the key findings.

The reference of Fabrication Of Electrical Pop Corn Machine, which should be formatted following a particular citation style (such as APA, MLA, or Chicago), is a list of all the sources cited in the title.

Other important sections of the Fabrication Of Electrical Pop Corn Machine should include the Title page, Dedication, Acknowledgments, Methodology, Results, Discussion, Appendices, Glossary, or Abbreviations List where applicable.